CycleOps 300PT User Manual download pdf (Page 2)

CHAPTER 1:UNPACKING THE CYCLEOPS INDOOR CYCLE

Place the box upright and cut the plastic binding straps. Lift the top of the box to expose the Indoor Cycle (IC) and packaging.

Remove all parts from the box and foam inserts and ensure all the following parts are included:

Part Qty

Indoor Cycle Frame 1

Front V Foot 1

Back V Foot with wheels 1

Seat Post 1

Handlebars 1

Hardware 1

Hardware

Stabalizer bolts (8)

Washers (8)

Plastic cups(2)

Phillips-head screws (4)

5mm Allen wrench (1)

6mm Allen wrench (1)

15mm pedal wrench (1)

Phillips-head screwdriver (1) 2.5mm Allen wrench

CHAPTER 2: BIKE ASSEMBLY

Step 1: Attach Stabilizer Feet

1. Note the difference between the front and rear stabilizer feet. The larger foot with wheels goes in the rear of the IC.

2. Align the rear base of the frame with the rear stabilizer and secure it with four 6mm bolts with washers. NOTE: Tighten

the inner bolts ﬁ rst, and then proceed to the outer bolts to ensure the foot is secured properly and evenly.

3. Repeat with the front stabilizer.

Front Stabilizer Feet

Rear Stabilizer Feet

Tools Required

Vice Grips or small clamping tool

17mm Cone wrench

15mm box wrench

10mm box wrench

Pliers

3mm Allen wrench

1 2 3 ... 12

No comments

CycleOps 300PT User Manual Page 2